Devices - OE05

Features

• High output power. Also suitable for large waiting areas with high efficiency
• Voice calling in case of Q-net BASIC, Q-net BASIC PLUS, Q-net Standard, Q-net Pro 5.0+ systems (max. two languages)

Technical specifications:

Audio parameters

speaker diameter……………………. 110mm

max. output power…………………… 10W

frequency range……………………… 70-16 000Hz

THD at 1 kHz, 10W…………………. 1%

SNR at 10W output power………… >60dB

Dimensions:

230mm x 230mm x 70mm (H x W x D)

Available Colors:

Black

Inputs:

Rating……………………….……. 12VDC, max 2A

Communication…….Q-net RS-485 (RJ-12 plug)

operating temperature…..+10..50 Celsius

miroSD card requirements:

Minimum 128MB, maximum 2GB microSD or microSDHC card, with the voice files on FAT32 system.

Voice files need to follow these requirements:

• 11.025, 16.000, 22.050 Hz sample rate 8/16 mono PCM WAV files

• FAT16, NTFS or other files systems are not recognized

Device operation:

Directly after switching on you see the actual firmware version on the display. After this you get the actual operation mode::

• F-0: Q-net BASIC, Q-net BASIC PLUS, Q-net Standard, Q-net Pro 6.x.x
• F-1: Q-net Pro 6.x.x

Changing the operation mode:

1. Disconnect the RJ-12 plug.
2. Press and hold the RIGHT button.
3. Reconnect the RJ-12 plug (while the button is still held). The newly chosen operation mode will appear: F-0 or F-1.
4. Release the button to save the new mode.

Setting the device’s address:

1. Disconnect the RJ-12 plug.
2. Press and hold the LEFT button.
3. Reconnect the RJ-12 plug (Sign “ADR” starts blinking.
4. Release the left button.
5. Start pushing the right button (or hold it) and you will see the new address.
6. Press the left button to save the address.

Content of the SD card

• Long file names are not allowed.
• Do not store any unnecessary files on the card.

The content of the SD card is different in the two operation mode!

In case of F-0:

All files in the SD card must be in the root directory.

The device will play the files in the following order:

1. 1clxxx.wav is played, where xxx is the client’s number (1-999)
2. 1coyyy.wav is played, where yyy is the counter’s number (1-99)
3. 2clxxx.wav is played, where xxx is the client’s number (1-999)
4. 2coyyy.wav is played, where yyy is the counter’s number (1-99)

In case of one language you have to use the first playable language files.

e.g.: 1cl001.wav, 1co012.wav, 2cl045.wav,…

In case of F-0 mode the address of the device has to be the same, like the first unit of the waiting area display.

In case of F-1:

Only in case of Q-net pro v5.0+ .

Default sounds

Volume settings:

During normal operation, press DOWN or UP button to set the volume accordingly.

The device plays the \\1cl999.wav file during setting the volume in F-0 mode.

The device plays the \\default.wav file during setting the volume in F-1 mode.

You can set the volume remotely with software in F-1 mode.

DING-DONG sounds:

The device will play the \\AD\\ad005.wav file if you enable the “play ding-dong signal” option in the latest Q-net PRO software.

Error codes:

E-01 … E-08: Wave file format unrecognized or unsupported

E-09: Wav files not found

E-32: SD card initialization failed

Increasing volume is not possible with increasing the number of units! The voices of the units are not synchronized with each other!